Download Our Catalog  • Contact Us  • About Us
Home Books Hulls Engines Collectors Items News and Information
Marpol Plaques | Fireplace Chain-Catches

Fireplace Chain-Catches

In Victorian, Federal, Craftsman, Greek Revival, Moorish, Roman, and Plain styles.  Also, matching cast tasse

Is your catch missing?

Was it removed during a former "modernizing?"

We make replica catches and tassels just like those made 75 to 100 years ago.  We copied six original designs, pictured here, and we will continue to add more.

Damper Chain 36-inch length with brass ring each end, $12.00 each.


Chain Catches (clockwise from upper right):    Plain, Arabesque, Victorian, Sunflower (polished), Craftsman, Sunflower (satin), Sunflower (as cast), Primitive Eagle, and center, Federal Eagle.

Satin finish,$58.00 each;
high polish finish, $68.00 each.  Call us directly to order polished pieces and do not order online; Tel 503-775-5954

Satin Finished Chain Catch

Polished Chain Catch

National Pipe Thread Nipple
Just like the originals, ours are threaded on the back for a 1/2 inch National Pipe Thread nipple (the nipple leads the chain back to the damper lever and it anchors your catch in the masonry.  Catch dimensions, 2.25 inches dia x 1.25 deep; tassel length 2"; material, silicon bronze (cast equivalent to Everdur).


Tassels (left to right):  Grapes & Leaves, Traditional Sash, Art Decco, Acorn, and Craftsman.  $22.00 each


For more information telephone us during business hours, Pacific Time Zone at 503-775-5954. Craftsman Plaques also manufactures marine castings, such as propellers and replica antique boat hardware. We also produce  a Commissioning Plaque in bronze (6.25" x 4.25" x .25 thick with holes prepared for No 4 screws) .  It is designed for your local engraver to apply in strong five-sixteenth-inch quarter inch letters your vessel's NAME or OFFICIAL NUMBER, YOUR NAME, the vessel's BUILDER, and the YEAR BUILT.  This plaque is theonly place to show this information all together.  The perfect gift for boat owner, or customer if you are a builder.  (We did not have a photo of this plaque on hand when making this webpage, so we scanned the original graphics; the black areas are raised, smooth, and ready for engraved characters.)  We als make a small Builder's Plaque that measures 1.5" x 3".

back to top

Use our PayPal Shopping Cart,
or call us at:

(503) 775-5954
You may also fax your order to:
 (503) 775-9073

Home | Books | Hulls | Engines | Accessories | Collectors Items | New & Information
Download Our Catalog | Contact Us | About Us

Copyright © 2002 Elliott Bay Steam Launch Co.